I have to agree a bit with Brewer mostly because I think he is being modest of build time but buying the exact same blank and components that you could buy already built as a factory rod would not give you much difference other than possible some price saving if in fact the builder took the same amount of time to build as the factory, for most Factories it would be 2 hours actual work time max to build. For the most part there is nothing wrong with a factory built rod for someone who does not know the difference and is why you’re asking.
Here are some things to look for when purchasing a factory built rod that most Custom builders would have as the normal operating procedure!
1) Make sure the cork is perfectly reamed
2) Handle is perfectly glued: No glue voids or dry spots, no glue mess around the threads where it meets the cork or exposed seat section.
3) Rod is spined if possible assuming the manufacture does that
4) Guide feet are prepped perfectly
5) Thread is wrapped tight meaning no gaps or very few
6) Guides are as close to straight as possible if not perfectly straight
7) Finish coat is covering all thread, as in no thread lines showing or very minimal thread lines showing
8) Back of guide feet tunnels are completely sealed with finish coat aka back filled, I actually apply one thin coat wait 12 hours and then apply a second thin coat for complete level coverage.
9) Rod is cleaned and polished.
If your factory rod has all of this then you would not gain anything by having one built other than saying it was “assembled” by a Rod Builder. If you assemble it your self then you have the satisfaction of that and that means a lot to me personally like tying your own fly or jig.
Now something else to think about that your factory rod purchase experience might not have:
1)Talk with a custom rod builder with experience and ask his advise on what rod blank would work the best for you for how you plan to fish.
2) Have him choose the components that work best with the rod as well as color
3) Have him inspect blank for straightness and possible damage
3) Have him place the guides in the best place for the rod
4) Have him choose the handle that’s most comfortable for you
5) Have him use or order your favorite thread color
Keep in mind I’m trying to compare Apples to Apples aka meat and potatoes rod there are loads of options when having a rod Custom Built.
Now if you are an extreme rod collector or just want something different than any one else you could have your builder offer thread Art as well and too many to list or Hand turned or hand made handles. This adds time and cost, but is truly a custom rod. I actually have one that was built by a very good friend of mine Mark Crouse that took him over 150 hours of work to complete but I do not fish it and is priceless.
Just a few reasons off the top of my head but since I have been around rods for so long I’m a bit over observant to the minor details that most would not even notice. Take a peak at your rods you have now with some of the things I pointed out and see how your rod rates.
Karry Batson
Batson Enterprises Inc
Ph: (877) 875-2381
Fax: (360) 683-3579
karry@batsonenterprises.com
www.batsonenterprises.com