#663385 - 02/16/11 07:30 AM
Re: Help....Might have "new jet boat built"
[Re: STRIKE ZONE]
|
River Nutrients
Registered: 04/25/00
Posts: 5003
Loc: East of Aberdeen, West of Mont...
|
Large Edward:
The double tackle trays are important....I just forgot on the initial order. It's not a accessory that many boat builders really push.
Strakes, another item that doesn't seem to be a "biggie" with many boat builders. Now Duckworth seems to feel that are important, for both "lift and speed control".....Wish I knew more about "strakes".......Any comments??????
_________________________
"Worse day sport fishing, still better than the best day working"
"I thought growing older, would take longer"
|
Top
|
|
|
|
#663407 - 02/16/11 11:32 AM
Re: Help....Might have "new jet boat built"
[Re: DrifterWA]
|
~B-F-D~
Registered: 03/27/09
Posts: 2217
|
Getting on step has alot to do with the hull's footprint or platform on the water. More horsepower is always nice but getting on step has more to do with how the boat is balanced from bow to stern in the water. As an example I owned a 17 foot sled with a 115 2 stroke Merc. It seemed to get on step okay but my 21 foot sled with a 115 4 stroke got up on step just as fast due to the length and balance of the hull despite the sluggish 4 stroke. This is the same reason why smaller hulls with a tiller sink a bit in the rear. Definitely something to be said about the advantages of a smaller sled however. Was very nice at the boat launch putting in and taking out when other boats were just too long to do either. Ease of handling due to how much lighter a smaller sled can be a definite plus. My 1 cent.
Edited by cobble cruiser (02/16/11 11:34 AM)
|
Top
|
|
|
|
#663421 - 02/16/11 12:39 PM
Re: Help....Might have "new jet boat built"
[Re: DrifterWA]
|
Returning Adult
Registered: 12/17/10
Posts: 267
Loc: Brier, WA
|
Strakes, another item that doesn't seem to be a "biggie" with many boat builders. Now Duckworth seems to feel that are important, for both "lift and speed control".....Wish I knew more about "strakes".......Any comments??????
Yeah, I don't know much about strakes either except for what I read on-line. I do know my Koffler has them. I agree with the comments about advantages of a smaller sled especially at the launch. I also have oars on my sled, and wouldn't run one without them. Very handy for adjusting the boat position when making "stealthy" anchor drops, correcting boat position when boondogging, manuevering around launches, etc.
|
Top
|
|
|
|
#663494 - 02/16/11 04:57 PM
Re: Help....Might have "new jet boat built"
[Re: STRIKE ZONE]
|
Parr
Registered: 02/23/10
Posts: 58
|
Nice boat,Cool stuff.It's always fun to get what ya want.17' by 72" is a nice dance floor,but with a 90/65 jet seems like a dog out of the hole to me,but what do I know.I started out with a 90/65 jet merc for my 18' LT which did ok just wasn't gonna beat any one off the line or in the long run.After 2 years I went with a 115/80 yami 4 stroke and glad I did.What it got me was a more level floating boat and not so bow heavy.Max'ed out the HP rating and a little more top end speed,out of the hole was the same over all.I'm gonna do some work on my pump and change a couple things,like make it "HOT" for that hole shot situation.Congrates on the new purchase and see ya out in the monte area getin-R- Dun.Good luck, SZ Why were you so bow heavy? No kicker? Gas tank in the front? Fishing with a lot of big dudes? Or all of the above?
|
Top
|
|
|
|
#663496 - 02/16/11 05:03 PM
Re: Help....Might have "new jet boat built"
[Re: Fish Stalker]
|
Parr
Registered: 02/23/10
Posts: 58
|
How do you guys think the 90/65 will push a 17X66 thor or the 17x72 boat that he just ordered?
If I was consistently fishing three plus me I would have a 115 on my Thor 17x66. But that's a lot of dudes for a 17 foot boat. The problem with the bigger motors is when you're fishing just yourself, or you and one other, a lot of times the stern will sit deep in the water, which affects how the boat tracks while side drifting, backtrolling etc. And it also affects what you can drift over.
|
Top
|
|
|
|
#665505 - 02/23/11 11:51 PM
Re: Help....Might have "new jet boat built"
[Re: Fish Stalker]
|
Spawner
Registered: 12/30/08
Posts: 560
Loc: around
|
Decided to keep the economy going as well----one week away till I get to pick up a new 17ft Thor built!!!
Just ordered the Hummingbird 596c HD DI and a gauntlet of Folbe rod holders through KONEZONE.COM's site.
no seat boxes in the boat just an open platform and a couple of pedistal seats-Running a 90HP MERC (though according to this thread they are junk?) as well as a 2stroke 8hp kicker for trolling and a 80lb thrust electric for hover/side drifting
Ill post pictures later next week hopefully with some chrome in it!!!! me too, new 18ft willie classic with 90/65 e-tec, either tomorrow or monday i bring it home, would have gone thor but the willie boys hooked me up real good.
|
Top
|
|
|
|
#669249 - 03/11/11 09:20 PM
Re: Help....Might have "new jet boat built"
[Re: Raptor24]
|
River Nutrients
Registered: 04/25/00
Posts: 5003
Loc: East of Aberdeen, West of Mont...
|
Deerlick:
Impressive.......Love the paint job........I really want to know how the Etech pushes that boat???? I assume 95/65????
You got your boats built faster than I will......When might is done....I'll post pic's and price........
_________________________
"Worse day sport fishing, still better than the best day working"
"I thought growing older, would take longer"
|
Top
|
|
|
|
#669270 - 03/11/11 10:40 PM
Re: Help....Might have "new jet boat built"
[Re: Fish Stalker]
|
BUCK NASTY!!
Registered: 01/26/00
Posts: 6312
Loc: Vancouver, WA
|
Maybe we should have a summer run fish off with our new sleds....I know who I got in mine already! Who? Keith
_________________________
It's time to put the red rubber nose away, clown seasons over.
|
Top
|
|
|
|
|
1 registered (Streamer),
854
Guests and
0
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
11499 Members
17 Forums
72912 Topics
824752 Posts
Max Online: 3937 @ 07/19/24 03:28 AM
|
|
|