#783715 - 09/07/12 12:14 AM
Re: Favorite Coho Spinner
[Re: ]
|
Parr
Registered: 09/06/12
Posts: 66
|
I agree, black works very well. The all black blue fox is effective. Even a black body works well.
|
|
Top
|
|
|
|
|
#783721 - 09/07/12 12:30 AM
Re: Favorite Coho Spinner
[Re: Tyler_C]
|
Repeat Spawner
Registered: 08/24/10
Posts: 1335
|
I've never had luck with the hootchies  . I've had success with size 4 mepps aglia, size 4 rvrfshr (classy not hootchified), and vibrax.
|
|
Top
|
|
|
|
|
#783723 - 09/07/12 12:39 AM
Re: Favorite Coho Spinner
[Re: Tyler_C]
|
River Nutrients
Registered: 02/14/06
Posts: 2533
Loc: Elma
|
Spinners for coho, a subject near and dear to my heart. I don't know a lot about the Skagit, but I was there the other day for work (Mt. Vernon) and it reminded me quite a bit of my home water the lower Chehalis. Here is FF02 with a #6 spinner, looks pink to me. I think that was before (or during) the first fall rains that year so the water was clear.  Oh yah a sharpie works wonders.  Another close up, I know this is a #6 french blade on some kind of cobbled together body.  You might notice some similarities to all the spinners in my pictures. IMO you will get about 100 % correct answers on this thread. Which is what makes the coho such a great sport fish! I fish a certain way in only a few rivers, and big/flashy/bright is what works for me. I am never surprised when someone catches fish on some color or design I have never had luck on. Confidence goes a looooong way for silvers. I have never had trouble getting a #5 or #6 Vibrax where I want it, but have had lots of luck with the RVRFSHRS too. They definitely fish deeper easier, but it all comes down to what kind of water you are in.
_________________________
WDFW - Turning outdoorsmen into golfers since 1994.
|
|
Top
|
|
|
|
|
#783727 - 09/07/12 12:50 AM
Re: Favorite Coho Spinner
[Re: Rocket Red]
|
Ranger Danger
Registered: 02/08/07
Posts: 3076
Loc: AK
|
IMO you will get about 100 % correct answers on this thread. Which is what makes the coho such a great sport fish!
The Bitch spinner returns! Time honored classic. I was glad the question was put forward as "what is your favorite" instead of "what is the best." Fish what you have confidence in, they all work, some better than others, at least on that day in that spot. When the water dirties up, #6's, aka the choppers, or the helicopters, fished a few feet off the bank in the slow to medium speed water can dominate.
_________________________
I am still not a cop. EZ Thread Yarn Balls "I don't care how you catch them, as long as you treat them well and with respect." Lani Waller in "A Steelheader's Way."
|
|
Top
|
|
|
|
|
#783736 - 09/07/12 01:23 AM
Re: Favorite Coho Spinner
[Re: ColeyG]
|
Parr
Registered: 09/06/12
Posts: 66
|
Everyone has their opinion, which is why i hate asking what is "best" lol because everyone has their "best" lure. I love to see what other fisherman use as their go-to lures. its really cool to see everyone mentioning a little bit different lure, and they all work. It proves that a lot of lures work for these fun fighting fish.
thanks for all the info you guys have provided so far! makes a great read for a beginner fisherman who wants to have some fun with these fish.
|
|
Top
|
|
|
|
|
#783739 - 09/07/12 02:10 AM
Re: Favorite Coho Spinner
[Re: Tyler_C]
|
River Nutrients
Registered: 11/07/99
Posts: 2685
Loc: Yelmish
|
i used to be a big blue fox fan, but haven't really bought any for coho fishing since gi joes went under and $1.99 blue foxes on sale every couple weeks went extinct. the $4 or $5 that those things cost now is hard to swallow when there's the possibility of losing a dozen of them in a hard day of fishing.
since then i've mostly just used homemade spinners, for silvers i just take an inch or so of hollow core 1/4" pencil lead and slide a small hoochy over it, (rather than using an expensive brass body), then add a bead and a #4 or 5 silver blade. works well, and costs less than a buck to make.
|
|
Top
|
|
|
|
#783745 - 09/07/12 06:23 AM
Re: Favorite Coho Spinner
[Re: Chum Man]
|
Fry
Registered: 09/02/10
Posts: 21
Loc: East County
|
My fav. is the Bitch in a 5 or 6 with a hoochie, big and flashy thats what works. It's also easier to recover them from the wood pile too and yep it's normally the free ones that work best.
_________________________
Live The Dream and Fish On
|
|
Top
|
|
|
|
|
#783762 - 09/07/12 10:35 AM
Re: Favorite Coho Spinner
[Re: DrifterWA]
|
Parr
Registered: 09/06/12
Posts: 66
|
homemade spinners are the way to go now. very cheap and work
|
|
Top
|
|
|
|
|
#783777 - 09/07/12 11:30 AM
Re: Favorite Coho Spinner
[Re: TanTastic84]
|
River Nutrients
Registered: 11/07/99
Posts: 2685
Loc: Yelmish
|
i feel that the only drawback to using lead bodies is that they aren't going to be quite as flashy or noisy as a brass body. i try to make up for that with a larger blade and the squid body.
i don't use #4s often in places like the chehalis with murky water. #5 is a minimum, if not a #6.
|
|
Top
|
|
|
|
|
#783781 - 09/07/12 11:47 AM
Re: Favorite Coho Spinner
[Re: TanTastic84]
|
Parr
Registered: 09/06/12
Posts: 66
|
I have been very into making spinners this year. I have been collecting lots and lots of material in order to make my own. It is a tremendous amount of fun to play around with fishing stuff.
I will post some pictures of what I have come up with later tonight after I tinker with some more supplies of mine.
I have a couple of questions. I have been using the worm sinkers / egg sinkers for the bodies of my spinners. I haven't had much time to test them out on the water, but do you think I should switch to actual spinner bodies designed to be used for spinner making? I don't foresee a huge issue when it comes to hydrodynamics, but again, I haven't had time to test out my creations. Like I said, I will post some pictures later tonight.
Also, I am currently making up spinners with #4 blades because I got a lot of them a while ago, so I have a stock pile. But I am going to make up some with #5 blades now that I have been reading posts.
Thank you to whomever started this thread! It is so much fun seeing all of the ideas people come up with. Very creative people we fishermen are. No problem TanTastic84. I as well love to see what people come up with. Its really cool to see all of these ideas work!
|
|
Top
|
|
|
|
|
#783789 - 09/07/12 12:08 PM
Re: Favorite Coho Spinner
[Re: Tyler_C]
|
Dick Nipples
Registered: 03/08/99
Posts: 27838
Loc: Seattle, Washington USA
|
Here's how they work       They've even been known to attract the occasional winter run when fishing in November...but I can't find the pics of that for some reason. Boot kings will knock the piss outta them, too As with most things, if you have reasonably proper gear and lures, then if you know what you're doing you will catch fish with them. Fish on... Todd
_________________________
 Team Flying Super Ditch Pickle
|
|
Top
|
|
|
|
|
#783803 - 09/07/12 12:57 PM
Re: Favorite Coho Spinner
[Re: steeliedrew]
|
Three Time Spawner
Registered: 12/29/99
Posts: 1604
Loc: Vancouver, Washington
|
Parker - Very impressive line-up! It's not possible to buy spinners like that anywhere. I build my own spinners too, but they don't turn out like yours.
Are the bodies Pen-Tac too? I have lots of Pen-Tac blades and bodies, but I have not tried powder paint on them. Maybe I should.....
Nicely done.
|
|
Top
|
|
|
|
|
#783835 - 09/07/12 03:05 PM
Re: Favorite Coho Spinner
[Re: cohoangler]
|
The Chosen One
Registered: 02/09/00
Posts: 13942
Loc: Tuleville
|
PenTac, RVRFSHR, MorTac, R&B, etc. I get my parts through these guys. Great place to shop online! http://www.barlowstackle.com/I use whatever plain brass bodies I can find or from whomever has given me some to try out. Set the oven to 300. Set a layer of foil on the bottom of the oven, as the coating will spill off the bodies as it melts. Take a body and put it head up on a shaft and slightly bend the tip of the shaft so the body doesn't fall off. Cook the bodies for 12 minutes. Dip in your first coat of powder coat. Cook for 12 minutes. Bob likes to dip the first coat in white. I just stick with the same color. Dip them again. Cook another 12 minutes. Once you take them out of the oven, let them cool just enough so you don't ruin the coating, but work fast to get the shaft out of the body....as it will be coated solid. Takes some prying and spinning. Use a very small drill bit to bore out the melted power coat in the butt section of the body. PITA....and a labor of love, but my kids call it "Daddy Crafts". All the credit for these spinners goes to Bob and Corey.
_________________________
Tule King Paker 
|
|
Top
|
|
|
|
|
#783839 - 09/07/12 03:38 PM
Re: Favorite Coho Spinner
[Re: The Moderator]
|
Parr
Registered: 09/06/12
Posts: 66
|
Those are some big fish Todd!
|
|
Top
|
|
|
|
|
#783842 - 09/07/12 03:44 PM
Re: Favorite Coho Spinner
[Re: Tyler_C]
|
Parr
Registered: 09/06/12
Posts: 66
|
Oh and i tried the Skagit today, no luck. The water is pretty milky. Not many fish showing themselves. We need a rain.
|
|
Top
|
|
|
|
|
#783852 - 09/07/12 04:37 PM
Re: Favorite Coho Spinner
[Re: Tyler_C]
|
Returning Adult
Registered: 09/20/01
Posts: 379
Loc: Seattle
|
"Favorite Spinner" is defintely the proper word choice. As you can see from the above responses you ask 50 coho fishermen what their favorite spinner is and you are likely get 50 different answers. But they all have one thing in common, they will all catch fish.
Coho are intersting in that they will at times hit anything and at times hit nothing.
But starting off with a big and flashy spinner with contrasting colors and a hootchie hanging off the back is a pretty good bet.
|
|
Top
|
|
|
|
|
|
2 registered (snit, Carcassman),
897
Guests and
9
Spiders online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
11499 Members
17 Forums
72912 Topics
824723 Posts
Max Online: 3937 @ 07/19/24 03:28 AM
|
|
|
Previous Topic
Index
