Spent the day on Saturday drilling holes and running tubing to turn the Eggerator into the Kegerator...


Here is the Photo evidence of the Fruits of my non-union labor! (Hops are a fruit right?)




Perlick faucets... simply the best... I'm custom building the Tap Handles and will post new photos when finished




Here's the Backside... There is still room for at least 2 more Taps





A view from the inside...




a view from the Outside... The 20# CO2 would've looked a hell of a lot better than the 5#... Oh well... Live, learn, then get drunk!!



No explanation neccessary for this one...


Home brew kicks Ass!!!

good job, everything look well planned and cut. sanki cans are the homebrewer's best option for depensing.

Beer is on my project list every weekend.

Nice job on the kegerator.

I like the use of grommets for the gas hoses, nice touch. Did you already know exactly where to drill to avoid coolant lines in the sides?

And where did you get those regulators? I like the big adjustment knob.

Kegworks.com supplied the Regulator, Faucets and Shanks. Lowes had the oversized grommets and Olympic brewing in Bremerton supplied the keg and hoses.

There was a schematic of the coolant lines on the back of the fridge and it didn't show any lines in that particular area... Once I got the hole saw thru the shell I poked around in the insulation just to make sure there were no lines before running the drill all the way thru.

harley, if your interested in 3gal or 5gal sanki cans my brewing buddy sells them. let me know and i'll get you contact with him.

Thanks, Brewer. I may need a couple more since I just bought a 20 cubic foot freezer and Ranco temp controller to store kegged beer in. I've got a 7 cu ft that holds two kegs for under the bar, and this new one will hold at least 6.

You can PM his contact info. Thanks.

Looking good--Im thirsty now

I started working on a beer fridge and then got carried away:

SWEET!!!!

I don't even drink anymore,and that sh!t's beautiful. Nice job.

the olympia serving tray is a nice little finish to the bar. those old sering trays are hard to find. i have a shlitz tray.

hey does the cask beer engine you have there actually work?

Who's the chick in the mirror?

Absolutely. It's an Angram I got off ebay from England. Cost more to ship it than it did to purchase. I'll hook a cornie of stout or porter to it during parties.

I've got quite a bit of Oly stuff and trays from different old breweries. Notice the Little Prince from Heidelberg? Got some other old Tacoma Heidelberg stuff, too.

The chick in the mirror is the bar wench, cook, accountant, social coordinator, mass consumer of dark beer...

yea well every bsement bar needs a beer wench, brewer has always said.

Thanks for asking the only question I had

Fish on...

Todd

Me 3