#84546 - 01/09/00 09:36 PM
FRONT OR REAR DRAG ON SPINNING REELS?
|
Parr
Registered: 11/22/99
Posts: 42
Loc: Orting, Wa.
|
Hey Guys & Gals Just looking for a little advice on the drag systems for spinning reels, I'm looking at a couple of Shimano's the Symetre and the Sahara in the 2000 & 4000 size, the Sahara also has 6.2:1 gear ratio in both models but the Symetre only has 6.2:1 in the 4000 model? Thanks for your help Fish.
_________________________
Got Jigs
|
Top
|
|
|
|
#84547 - 01/09/00 11:52 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Returning Adult
Registered: 07/06/99
Posts: 470
Loc: Seattle, Washington, US
|
Front drag, it lasts longer.
|
Top
|
|
|
|
#84548 - 01/10/00 02:20 AM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Returning Adult
Registered: 03/11/99
Posts: 441
Loc: Carson, WA
|
I like the rear drags, cause they are easy to get to, when fighting a fish. When a little more or a little less is necessary.
|
Top
|
|
|
|
#84549 - 01/10/00 02:55 AM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Juvenille at Sea
Registered: 03/07/99
Posts: 99
|
Front drag. Set it a hair light and you can put pressure on the spool with your fingers/palm.
|
Top
|
|
|
|
#84550 - 01/10/00 07:10 AM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Returning Adult
Registered: 12/06/99
Posts: 419
Loc: Seattle
|
fish, You are`nt by chance feeding on my ignorance are ya`?..*L* Thanks for asking questions I wouldn`t know any better too..heh-heh.. BTW, I`d right now have to say front, it`s all the better I know,,so far..
_________________________
Teach your kids, Ever wonder why Noah didn`t just slap them 2 mosquitos????
|
Top
|
|
|
|
#84551 - 01/10/00 12:16 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Fry
Registered: 10/23/99
Posts: 23
Loc: Everett,WA
|
Front drags perform better. The larger washer size dissipates the heat on those long runs. The larger washer size also means it will be smoother. The location on top of the reel means the tension is more dirrect and not transferd down the shaft. If you set your drad a little light and apply pressure with your finger during the fight don't forget to grab the spool when setting the hook!
|
Top
|
|
|
|
#84552 - 01/10/00 01:20 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Alevin
Registered: 12/31/99
Posts: 11
Loc: Port Townsend, WA, Jefferson
|
Here's another option-- Abu Garcia has introduced a new center drag reel system. One is built in Sweden and costs a lot; it's the Suveran. It's heavy being all metal, but it is great. They just introduced a lighter model, the Center Drag, that I was fortunate enough to test on chinook in the Elk River in SW Oregon. I don't think I would have a spinning reel without a center drag system if I was fishing for big, hard-running fish. Not only are the drag washers two to four times larger than those on front-drag reels (and a whole lot larger than those on rear drag reels), they are easy to get to if you want to adjust the drag while playing a fish. On this trip, we landed chinook up to 30 lbs on the reels with no problems. I've also used the Suveran and turned a seal which grabbed my rockfish. The seal ran about 100 yards before stopping, and the drag had no faults or chatters. It equalled the drag on the best baitcasters. If you're stuck on Shimano, that's one thing, they are good reels, but I would certainly look at the Center Drags before I buy.
|
Top
|
|
|
|
#84553 - 01/10/00 02:06 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Returning Adult
Registered: 07/28/99
Posts: 447
Loc: Seattle, WA, USA
|
Although rear drags are easier to reach, front drags are consistently smoother. I've had the Shimano Spirex 2000 in both front and rear drags, and there's definitely a difference; the front drag reel is much smoother.
I also prefer the 2000 to the 4000 size, but I run thin diameter 8 and 10 lb line on the smaller reel (12 lb is not recommended). It holds between 100-110 yards; plenty enough for fishing, but if you break a significant chunk, you definitely don't want to hook a runner. The 4000 holds way more line than is necessary and is a lot heavier than most steelhead spinning and casting reels. Shimano could use a '3000' series, but until one comes along, I'm satisfied with the 2000.
You may also want to include the Spirex in your choices. I like the paddle reel handle for easy reeling, especially after first setting the hook when I'm groping for the handle. The Spirex also has a roller bearing in the line guide, making the drag even smoother. The Symetre has a bushing thats not nearly as smooth (I'm not familiar with the Sahara). Good Luck
|
Top
|
|
|
|
#84554 - 01/11/00 09:00 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Parr
Registered: 11/22/99
Posts: 42
Loc: Orting, Wa.
|
Thanks to everyone that replied,it helped me out alot. I did a little more research as suggested. The center drag sounds okay but its heavier than the others, and only has a 5.2:1 gear ratio? The Shimano Sahara has a front drag, 6.2:1 gear ratio, and 3 ball bearings + 1 ball bearing instead of a roller bearing, as in the Spirex, also it has super stopper II positive stop without that little back spin like the Spirex has when you try to set the hook? I have the Spirex 2000rb and 4000rb. Thanks again Fish.
_________________________
Got Jigs
|
Top
|
|
|
|
#84555 - 01/12/00 11:02 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Parr
Registered: 11/22/99
Posts: 42
Loc: Orting, Wa.
|
OOPS? Sorry had the wrong info on that Shimano Sahara, I left the old computer and went down to the local tackle store today and found out the +1 ball bearing is the one with anti reverse for the super stopper II, not the line roller, but this reel also comes with a free spare aluminum spool not the graphite one like the others. I also tried out that Abu Garcia center drag reel, it was the 6 bb model and it wasn't as free and smooth as the Sahara but the drag system is twice as big? See Ya Fish.
_________________________
Got Jigs
|
Top
|
|
|
|
#84556 - 01/13/00 12:44 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Alevin
Registered: 12/31/99
Posts: 11
Loc: Port Townsend, WA, Jefferson
|
Fish--
Can't answer for the stickiness of the Suveran reel... I'm surprised though. I have a couple of the smaller models that are very good; the best drag I've used on a spinning reel since the days of the Daiwa SS series. Since I haven't fished with the Shimanos, I can't compare them.
What I do like with the center drag reel is the fact that the drag is right under your finger tips. You don't have to do contortions to change your drag setting. If you give me your e-mail address, I can forward a jpg file that shows the differences in drag washers... if I can find it.
Another point, on a trip the party I was with caught 5 chinook in the 28-30 lb. size range on the Abu Center Drag. At no point did we have problems with the drag sticking or chattering.
|
Top
|
|
|
|
#84557 - 01/13/00 02:26 PM
Re: FRONT OR REAR DRAG ON SPINNING REELS?
|
Parr
Registered: 11/22/99
Posts: 42
Loc: Orting, Wa.
|
Hey Keith My E-Mail address is on the profile of this board. There's no doubt about it the drag was way bigger, the guy behind the counter was also very fond of it also? See Ya Fish.
_________________________
Got Jigs
|
Top
|
|
|
|
|
0 registered (),
1135
Guests and
0
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
11499 Members
17 Forums
72917 Topics
824866 Posts
Max Online: 3937 @ 07/19/24 03:28 AM
|
|
|